
Windows Utility					    1993. 2.22

The \WINDOWS directory contains following files:

        README          The file you are reading

	WTTABLET.DRV	Tablet driver v3.13 for Windows 3.X

	WTC_OLD.EXE	Tablet configuration for Windows
                        3.0 environment.

	WTCONFIG.EXE	Tablet configuration for Windows
                        3.1 environment.


Install Windows utility:
	insert the Utility Disk to your disk driver A:
        copy files into Windows directory as following command:

                >CD \(windows-directory)  <enter>
                >COPY A:\WINDOWS  <enter>

      * Using WTTABLET.DRV
        The file is a mouse driver used under Microsoft Windows 3.0
        above enviroment.  Its working area is absolute mapping to the
        screen.  The following are the steps to setup the mouse driver:

        1.  locate directory under Windows directory

                >CD \(windows-directory)  <enter>

        2.  run Windows setup procedure

                >SETUP  <enter>

        3.  move cursor (light bar) to select item "Mouse"

        4.  select item "Other"

        5.  back cursor to erase prefixal path "A:\" and enter new path
            "C:\(windows-directory)"

	6.  select item "Tablet driver v3.13 for Windows 3.X" and exit

        7.  Now, you have an absolute mode mouse in Windows.


      * Using WTCONFIG.EXE
        This file allows you to do configuration for the Tablet's working
        mode and mapping area to screen. (If your Windows environment is
        version 3.0 please use WTC_OLD.EXE)
        Following are the steps to install the WTCONFIG.EXE in Windows.

        1.  Click "File" on Program Manager

        2.  Click "New..."

        3.  Select "Program Item", and click OK

        4.  Click "Command line" or press <ALT>-C

        5.  Type driver:\...path...\WTCONFIG <enter>

	6.  Since you only click twice the icon, and you can do
            configuration


      * Using WTC_OLD.EXE
	This file is used for Windows 3.0 environment, it allows you
        to do configuration for the Tablet's working mode and mapping
	area to screen. But if your Windows environment is version
	3.1, we recommand you to use WTCONFIG.EXE. The steps that
	install WTC_OLD.EXE are same as WTCONFIG.EXE.

End of file
